Journal
Journal
- Abhishek Nigam (2017); “An Optimization Of Process Parameters: To Minimize The Casting Defects Of Mild Steel Product In Green Sand CastingProcess By Using Orthogonal Array And Taguchi Method”, International Journal for Science and Advance Research In TechnologyISSN : 2395-1052 (Volume 3, Issue 2 Feb,2017) pp:217-223.
- Abhishek Nigam (2017); “An Optimization Of Various Heat Treatment Process Parameters: To Improve The Surface Hardness Of Mild Steel Product By Taguchi Method And Anova Techniques”, International Journal for Science and Advance Research In TechnologyISSN : 2395-1052 (Volume 3, Issue 5 May,2017) pp:388-393.
- Abhishek Nigam (2018); “An Optimization Of Process Parameters Of Drilling Process Of MS Plate For MaximumMaterial Removal Rate Using Taguchi Method”,International Journal for Science and Advance Research In TechnologyISSN : 2395-1052 (Volume 4, Issue 11 Nov,2018).
- Abhishek Nigam (2018); “Experimental Analysis And Optimization Of Process Parameters In Machining Process Of Titanium Alloys To Improve Performance On Die-Sinking Electric Discharge Machine”,International Journal for Science and Advance Research In TechnologyISSN : 2395-1052 (Volume 4, Issue 12 Dec,2018).
- Abhishek Nigam (2019); “Experimental Analysis And Optimization Of Process Parameters In Machining Process Of Titanium Alloys To Improve Performance On Die-Sinking Electric Discharge Machine”,International Journal for Science and Advance Research In TechnologyISSN : 2395-1052 (Volume 5, Issue 3 Mar,2019).
- Abhishek Nigam (2019); “An Experimental Study Of Effects Of Various Heat Treatment Processes On Hardness And Ultimate Tensile Strength Of Mild Steel Product After Casting”,International Journal for Science and Advance Research In TechnologyISSN : 2395-1052 (Volume 5, Issue 3 Mar,2019).
- Abhishek Nigam (2019); “Optimization of Process Parameters In Cold Chamber Die Casting Process Using Taguchi Method”,International Journal for Science and Advance Research In TechnologyISSN : 2395-1052 (Volume 5, Issue 4 Apr,2019).
- Abhishek Nigam (2019); “An Experimental Study on Tool Wear Rate And Chip Formation During Drilling Process of Mild Steel Plate”,International Journal for Science and Advance Research In TechnologyISSN : 2395-1052 (Volume 5, Issue 4 Apr,2019).
- Ambrish Singh (2019); “Experimental Analysis of three different cases of Air Cooled ThermoelectricRefrigeration System, Module TEC-12715”,International Journal of Advance Research and Innovative Ideas in EducationISSN : 2395-4396 (Volume 5, Issue 6 ,2019).
- Anurag Chaturvedi (2019); “Formation of Self Curing concrete using Sawdust and Sodium Polyacrylate(SP)”,Journal of Emerging Technologies and Innovative ResearchISSN : 2349-5162 (Volume 6, Issue 5 May,2019).
- Anurag Chaturvedi (2019); “A ReviewPaper on Self Curing Concrete:A study of various self-curing agents”,Journal of Emerging Technologies and Innovative ResearchISSN : 2349-5162 (Volume 6, Issue 5 May ,2019).
- Arvind Singh (2021); “Soil Stabilization with lime for Expensive Soil.”,INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTSISSN : 2320-2882 (Volume 9, Issue 7 May ,2021).
- Ashish Kumar Katiyar (2017); “Microstructural Evolution of High Phosphorus Steel Using Warm Multiaxial Deformation”, Materials today Proceedings ISSN : 2214-7853 (Volume 4, Issue 9 May ,2017).
- Ashish Kumar Katiyar, Bharti Yadav (2019); “An experimental investigation of tool wear rate and surface roughness inmachining process of titanium alloys on die-sinking electric discharge machine”, International Journal for Science and Advance Research In Technology ISSN : 2395-1052 (Volume 5, Issue 3 March ,2019).
- Ashish Kumar Katiyar (2021); “Coefficient of Performance Computation of a Lecture Hall”, International Journal for Research in Engineering, Science & Management ISSN : 2581-5792 (Volume 4, Issue 7July ,2021).
- Ashish Kumar Katiyar (2021); “A Review on Coefficient of Performance of HVAC Framework”, International Journal for Research in Engineering, Science & Management ISSN : 2581-5792 (Volume 4, Issue 7July ,2021).
- Bharti Yadav (2017); “Enhancement of Heat transfer in heat pipes using Al2O3 /Benzene based Nano-coolants”, International Journal of Research and Scientific InnovationISSN : 2321-2705 (Volume 4, Issue 7July ,2017).
- Bharti Yadav (2017); “Comparison between Thermal Conductivity of Al2O3 /Benzene and Tio2/Benzene based Nanofluids based on Heat pipe Application”, International Journal for Research in Applied Science & Engineering Technology (IJRASET)ISSN : 2321-9653 (Volume 5, Issue 12Dec ,2017).
- Darakhshan Hayat Khan (2019); “Simulation of Advanced DC-DC Converter for DC Nano-Grid Unified with Solar PV Power Generation System”, International Journal of Engineering and Technical Research (IJETR) ISSN: 2454-4698 (Volume 9, Issue 5May ,2019).
- Darakhshan Hayat Khan (2019); “Study and Modelling of DC/DC Converter for DC Nano-Grid Hybrid with solar collector Power Generation System”, Journal of Emerging Technologies and Innovative ResearchISSN : 2349-5162 (Volume 6, Issue 5 May ,2019).
- Dr. Sudhir Kumar Singh (2018)”Study of Performance Prediction Software Development Models in Neural Network Back Propagation”, Solid State Technology JournalISSN : 0038-IIIX (Volume 61 No 4,2018).
- Dr. Sudhir Kumar Singh (2019) “Analysis of Developers Prediction Performance on Software Models Using Back Propagation Algorithm”, Turkish Journal of Computer and Mathematics Education (Indexed by SCOPUS) ISSN : 1309-4653Volume 10 N0. 2 (2019), PP: 701-707
- Dr. Sudhir Kumar Singh (2022) “A Comparatively Study of Fuzzy Logic Intelligent Transportation System Analysis of Moving Traffic Control and Parking Vehicle Management Urban Area”, International Journal of Engineering Applied Sciences and Technology ISSN :2455-277Volume 7, Issue 1 (May 2022)
- Dr. Sudhir Kumar Singh, RajendarRajouria (2022) “The Analysis of Fundamental Applications and Tools used in IoT Technologies Recently and Future”, International Journal of innovation Research in Engineering & Advance Technology(IJREAT) ISSN No. 2582-8746Volume 3, Issue 2 (March 2022)
- Gaurav Pandey (2020) “Multi-objective optimization of vibration assisted electrical discharge drilling process using PCA based GRA method”, Materials Today: ProceedingsISSN No. 2214-7853Volume 26, Part 2, 2020, Pages 2667-2672 (March 2022)
- Gaurav Pandey (2021) “Experimental Study During Electrical Discharge Machining of Reinforced Carbon Fiber Plastic Material”, International Journal for Research in Applied Science & Engineering Technology (IJRASET)ISSN No:2321-9653 Volume 9, Issue 8, Aug 2021
- Gaurav Pandey (2021) “Developmental and Experimental study of rotary ultrasonic drilling process”, International Journal for Research in Applied Science & Engineering Technology (IJRASET)ISSN No:2321-9653 Volume 9, Issue 8, Aug 2021
- Gaurav Pandey (2022) “Experimental investigation of vibration assisted electrical discharge drilling of Al-Tib2”, International Journal on Interactive Design and Manufacturing (IJIDM)ISSN No: 1955-2513https://doi.org/10.1007/s12008-022-01002-z
- Gaurav Pandey (2022) “Effect of different wire materials on WEDM performance of Bio-compatible material”, Scindo, Production Engineering Archives, ISSN No: 2353-5156 Volume 28, Issue 1 (March 2022)
- Mayank Maheshwari (2017) “Performance evaluation of heat recovery generator for ammonia–water mixture in combined cycle power plants”, International Journal of Ambient Energy, ISSN No: 2162-8246, Volume 38, Issue 7 , 2017
- Mayank Maheshwari (2017) “Energy analysis of intercooled reheat combined cycle withammonia water mixture based bottoming cycle”,ScienceDirect-Energy ISSN No: 0360-5442, Volume 121 ,2020, ISSN No: 2162-8246, https://doi.org/10.1016/j.applthermaleng.2017.04.145
- Mayank Maheshwari (2018) “Effect of atmospheric condition and ammonia mass fractionon the combined cycle for power and cooling using ammonia water mixture in bottoming cycle”, ScienceDirect-Energy ISSN No: 0360-5442, Volume 148 ,2018 https://doi.org/10.1016/j.energy.2018.01.131
- Mayank Maheshwari (2019) “Thermodynamic study of different configurations of gas-steam combined cycles employing intercooling and different means of cooling in topping cycle”,ScienceDirect-Applied Thermal EngineeringISSN No: 1359-4311, Volume 65 , 2019 https://doi.org/10.1016/j.energy.2018.01.131
- Mayank Maheshwari (2019) “Comparative evaluation of different combined cycle configurations having simple gas turbine, steam turbine and ammonia water turbine”, Energy ISSN No: 0360-5442, Volume 168 , 2019 https://doi.org/10.1016/j.energy.2018.12.008
- Mayank Maheshwari (2020) “Thermo-economic analysis of combined cycle configurations with intercooling and reheating”, ScienceDirect-Energy ISSN No: 0360-5442, Volume 205,2020 https://doi.org/10.1016/j.energy.2020.118049
- Mayank Maheshwari (2022) “Exergoeconomic study of reheat combined cycle configurations using steam and ammonia-water mixturefor bottoming cycle parameters”, Journal of Thermal Engineering, ISSN No: 2395-0056, Volume 205,2020 https://doi.org/10.1016/j.energy.2020.118049
- Amit Kumar Sinha (2018) “Generation of High Voltage Using Cockcroft –Walton Voltage Multiplier Circuit”, International Journal of Engineering & Technology (IRJET), ISSN No: 2148-7847, Volume 5, Issue 1 (2018).
- Amit Kumar Sinha (2018) “Arduino Based Garbage Monitoring System using IOT”, International Journal of Engineering & Technology (IRJET), ISSN No: 2148-7847, Volume 6, Issue 12 (2019).
- Narendra Kumar (2020) “A Survey on Image Forgery Estimation employing Neural Networks”, Journal of Emerging Technologies and Innovative ResearchISSN : 2349-5162 (Volume 7, Issue 4 April ,2020)
- Narendra Kumar (2020) “A Review on soft computing approaches for work load forecasting for Cloud Services”, Journal of Emerging Technologies and Innovative ResearchISSN : 2349-5162 (Volume 7, Issue 5 May,2020).
- Narendra Kumar Yadav (2017)”An Enhanced SIMPLE Protocol for Wireless Body Area Sensor Network”, International Journal of Scientific Research Engineering & Technology (IJSRET) ISSN: 2278 – 0882, Volume 6, Issue 3, March 2017
- Narendra Kumar Yadav (2020)”AN IMPACT STUDY OF CLOUD COMPUTING ON DATA STORAGE SECURITY ISSUES”, INTERNATIONAL JOURNAL OF RESEARCH AND ANALYTICAL REVIEWS, ISSN: 2348-1269, Volume 7, Issue 2, May 2020
- Rajeev Jha (2022)”Impact of Fuel Cell System on Under Frequency Load Shedding Scheme Design”, Distributed Generation & Alternative Energy Journal,River Publishers, ISSN: 2156-6550, Volume 37, Issue5, May 2022
- RenuChaurasia (2017)”Quality Estimation based Multi-Sensor Data Fusion in Wireless Sensor Network”, International Journal of Research in Engineering & Advance Technology (IJREAT), , ISSN: 2278-1021, Volume 6 Issue 2 (2017)
- PraneetMadhaw (2017)”An Experimental Study on Pervious Concrete (Mix-Ratio, Strength and Porous Properties)”, International Journal of Engineering Research & Technology (IJERT), ISSN No: 2278-0181, Volume 6, Issue 12 (2017).
- PraneetMadhaw (2019)”Seismic Performance Assessment OZN Structures by using Aluminium Shear”International Journal of Engineering Research & Technology (IJERT), ISSN No: 2278-0181, Volume 8, Issue 6 (2019).
- Srivastav Monika Yogeshkishore, PraneetMadhaw& Shikha Pal (2022)”Stabilization of soil with the help of lime contain”International Journal for Scientific Research & Development, ISSN No: 2321-0613, Volume 9, Issue 11 (2022).
- Srivastav Monika Yogeshkishore, (2019)”Strength of pervious concrete with partial replacement of sand with course aggregate”International Journal for Scientific Research and Development, ISSN No: 2321-0613, Volume 7, Issue 2 (2019).
- Shikha Pal (2019)”An Evaluation on the composition of Coal Fly Ash and its Co-Placement with Concrete”International Journal of Engineering & Technology (IRJET), ISSN No: 2148-7847, Volume 6, Issue 5 (2019).
- Shikha Pal(2021)”Experimental Study on Partial Replacement of Cement with Coal Fly Ash”International Journal of Engineering & Technology (IRJET), ISSN No: 2148-7847, Volume 8, Issue 6 (2021).
- Shahenoor Siddique, Darakhshan Hayat Khan(2022)”Manage Formula for Conductance Estimation Utilizing Neural Network Controller for a DSTATCOM”International Journal of Research Publication and Reviews, ISSN No: 2582-7421, Volume 3, Issue 7 (2022).
- Sandhya Devi (2017)”Optimizing Performance Of Clustering Time Series DatabaseUsing Fast Feature Selection Algorithm.”International Journal of Research in Engineering& Advance Technology (IJREAT),ISSN No: 2347-7847Volume 5, Issue 2, (April-May, 2017).
- Richa Mishra (2017)”Estimation of Bursts Length and Design of a Fiber Delay Line based OBS Router.”Journal of Engineering Science and Technology,ISSN No: 1823-4690Volume 12, Issue 3, (2017).
- SandeepTiwari(2022)”Integrating Renewable Energy in Smart Grid: Opportunity, Challenges and Progress in India”International Journal of Engineering & Technology (IRJET), ISSN No: 2148-7847, Volume 9, Issue 1 (2022)
- Sony Tripathi(2022)”A Review Paper of Performance analysis slotted CSMA/CA”International Journal of Engineering & Technology (IRJET), ISSN No: 2148-7847, Volume 7, Issue 1 (2020)
- Sony Tripathi (2021)”Automatic Query Expansion for Term Selection with BERT Score and WordNet Semantic Filtering”International Journal of Scientific Research in Computer Science, Engineering and Information Technology, ISSN No: 2456-3307, Volume 8, Issue 4 (2021)